Talk:Tiki forum archive/Forum 5/8998

From Lojban

Source: 2013 Tiki forum 5, thread #8998. Original authors, UTC times, post IDs, and reply-parent IDs are preserved. This is an archive, not an active article discussion.

Using TTS to create lojbanic spoken text

Using TTS to create lojbanic spoken text

remod · 2009-12-05 12:49 UTC · Tiki post #8998

Hi there, I'm trying to use Text to Speech software to create some

lojbanic text: I've put an example here: http://www.dentato.com/sutra1_alpha.mp3 I'd really appreciate comments and suggestions.

remod.


To unsubscribe from this list, send mail to [email protected] with the subject unsubscribe, or go to http://www.lojban.org/lsg2/, or if

you're really stuck, send mail to [email protected] for help.

Using TTS to create lojbanic spoken text

Jorge Llambías <[email protected]> · 2009-12-05 12:47 UTC · Tiki post #9001 · reply to Tiki post #8998

On Sun, Oct 18, 2009 at 6:40 AM, Remo Dentato <[email protected]> wrote:

> And a new one: http://www.dentato.com/sutra2_mido.mp3 > >> I've put an example here: http://www.dentato.com/sutra1_alpha.mp3

They sound pretty good to me. I hear "denba bu"instead of "denpa bu" and I would like a more clear "e" at the end of "jbopre", but that may be just me.

mu'o mi'e xorxes


To unsubscribe from this list, send mail to [email protected] with the subject unsubscribe, or go to http://www.lojban.org/lsg2/, or if

you're really stuck, send mail to [email protected] for help.

Using TTS to create lojbanic spoken text

remod · 2009-12-05 12:49 UTC · Tiki post #8999 · reply to Tiki post #8998

And a new one: http://www.dentato.com/sutra2_mido.mp3

On Sat, Oct 17, 2009 at 10:53 PM, Remo Dentato <[email protected]> wrote: > Hi there, I'm trying to use Text to Speech software to create some > lojbanic text: > I've put an example here: http://www.dentato.com/sutra1_alpha.mp3 > I'd really appreciate comments and suggestions. > > remod. >


To unsubscribe from this list, send mail to [email protected] with the subject unsubscribe, or go to http://www.lojban.org/lsg2/, or if

you're really stuck, send mail to [email protected] for help.

Using TTS to create lojbanic spoken text

Jorge Llambías <[email protected]> · 2009-12-05 12:49 UTC · Tiki post #9004 · reply to Tiki post #8998

On Sun, Oct 18, 2009 at 6:40 AM, Remo Dentato <[email protected]> wrote:

> And a new one: http://www.dentato.com/sutra2_mid o.mp3 > >> I've put an example here: http://www.dentato.com/sutra1_alpha.mp3

They sound pretty good to me. I hear "denba bu"instead of "denpa bu" and I would like a more clear "e" at the end of "jbopre", but that may be just me.

mu'o mi'e xorxes


To unsubscribe from this list, send mail to [email protected] with the subject unsubscribe, or go to http://www.lojban.org/lsg2/, or if

you're really stuck, send mail to [email protected] for help.

Using TTS to create lojbanic spoken text

Oleksii Melnyk <[email protected]> · 2009-12-05 12:56 UTC · Tiki post #9009 · reply to Tiki post #8998

IMO it says (x) instead of (').

2009/10/18, Remo Dentato <[email protected]>: > And a new one: http://www.dentato.com/sutra2_mido.mp3 > > On Sat, Oct 17, 2009 at 10:53 PM, Remo Dentato <[email protected]> wrote: >> Hi there, I'm trying to use Text to Speech software to create some >> lojbanic text: >> I've put an example here: http://www.dentato.com/sutra1_alpha.mp3 >> I'd really appreciate comments and suggestions. >> >> remod. >> > > > To unsubscribe from this list, send mail to [email protected] > with the subject unsubscribe, or go to http://www.lojban.org/lsg2/, or if > you're really stuck, send mail to [email protected] for help. > >


-- mu'o mi'e lex


To unsubscribe from this list, send mail to [email protected] with the subject unsubscribe, or go to http://www.lojban.org/lsg2/, or if

you're really stuck, send mail to [email protected] for help.

Using TTS to create lojbanic spoken text

stevo · 2009-12-05 12:56 UTC · Tiki post #9010 · reply to Tiki post #8998

In a message dated 10/18/2009 13:13:04 Eastern Daylight Time,

[email protected] writes:


> IMO it says (x) instead of ('). >

I agree. It sounds like Eva is saying "coxo" instead of "co'o". I didn't notice it anywhere else.

mu'o mi'e stevon

Using TTS to create lojbanic spoken text

remod · 2009-12-05 12:56 UTC · Tiki post #9011 · reply to Tiki post #8998

>> IMO it says (x) instead of (').

> I agree. It sounds like Eva is saying "coxo" instead of "co'o". I didn't > notice it anywhere else.

Sometimes she does and sometime she doesn't. It would need more tweaking.

Unfortunately I'll stop exploring the Ivona voices, They told me that to distribure audio files, even for non-commercial uses like producing lojban examples, I need to buy a commercial licenses. While I didn't mind to invest a 100$ or so in an hobby like Lojban, I can't afford a comercial license (that I guess will be in the order of the thousands).

Too bad. Probably they make enough money and don't need to hobbyst users like me.

remod


To unsubscribe from this list, send mail to [email protected] with the subject unsubscribe, or go to http://www.lojban.org/lsg2/, or if

you're really stuck, send mail to [email protected] for help.

Using TTS to create lojbanic spoken text

totus · 2009-12-05 12:56 UTC · Tiki post #9012 · reply to Tiki post #8998

> >

> > >> IMO it says (x) instead of ('). > > > I agree. It sounds like Eva is saying "coxo" instead of "co'o". I didn't > > > notice it anywhere else. > > > > Sometimes she does and sometime she doesn't. It would need more tweaking. > > > > Unfortunately I'll stop exploring the Ivona voices, They told me that > > to distribure audio files, even for non-commercial uses like producing > > lojban examples, I need to buy a commercial licenses. While I didn't > > mind to invest a 100$ or so in an hobby like Lojban, I can't afford a > > comercial license (that I guess will be in the order of the > > thousands). > > > > Too bad. Probably they make enough money and don't need to hobbyst > > users like me. > >

How much would a commercial developer's license cost? Would they consider a lower-priced licence for non-profts? Perhaps, other lojbanists would be prepared to chip in. I would certainly consider it.

totus


To unsubscribe from this list, send mail to [email protected] with the subject unsubscribe, or go to http://www.lojban.org/lsg2/, or if

you're really stuck, send mail to [email protected] for help.

Using TTS to create lojbanic spoken text

lukebergen · 2009-12-05 12:56 UTC · Tiki post #9013 · reply to Tiki post #8998

just had a chance to listen to these. That's pretty freaking awesome.

Sucks about the license thing. Is there no free-ware/open source software for doing this sort of thing?

On Mon, Oct 19, 2009 at 11:29 AM, A. PIEKARSKI <[email protected]> wrote:

> > > > > > > >> IMO it says (x) instead of ('). > > > > I agree. It sounds like Eva is saying "coxo" instead of "co'o". I > didn't > > > > notice it anywhere else. > > > > > > Sometimes she does and sometime she doesn't. It would need more > tweaking. > > > > > > Unfortunately I'll stop exploring the Ivona voices, They told me that > > > to distribure audio files, even for non-commercial uses like producing > > > lojban examples, I need to buy a commercial licenses. While I didn't > > > mind to invest a 100$ or so in an hobby like Lojban, I can't afford a > > > comercial license (that I guess will be in the order of the > > > thousands). > > > > > > Too bad. Probably they make enough money and don't need to hobbyst > > > users like me. > > > > > How much would a commercial developer's license cost? Would they consider > a lower-priced > licence for non-profts? Perhaps, other lojbanists would be prepared to > chip in. I would > certainly consider it. > > totus > > > > To unsubscribe from this list, send mail to [email protected] > with the subject unsubscribe, or go to http://www.lojban.org/lsg2/, or if > you're really stuck, send mail to [email protected] for help. >

>

Using TTS to create lojbanic spoken text

Jonathan Duddington <[email protected]> · 2009-12-05 12:56 UTC · Tiki post #9014 · reply to Tiki post #8998

On 19 Oct, Remo Dentato <[email protected]> wrote:

> Unfortunately I'll stop exploring the Ivona voices, They told me that > to distribure audio files, even for non-commercial uses like producing > lojban examples, I need to buy a commercial licenses.

"eSpeak" is an open-source TTS with a lojban voice which you can experiment with:

http://espeak.sourceforge.net

The name of the lojban voice is "jbo".

The current development version has a few improvements. It is at: http://espeak.sf.net/test/latest.html

If you have suggestions for corrections, please tell me.

eSpeak uses formant synthesis and therefore the quality is not as good.

However, eSpeak can also be used as a front-end for "mbrola" diphone

voices, which sound more human. Perhaps you find one which has the necessary set of phonemes for lojban. Information on eSpeak + mbrola is at: http://espeak.sourceforge.net/mbrola.html


To unsubscribe from this list, send mail to [email protected] with the subject unsubscribe, or go to http://www.lojban.org/lsg2/, or if

you're really stuck, send mail to [email protected] for help.

Using TTS to create lojbanic spoken text

lukebergen · 2009-12-05 12:56 UTC · Tiki post #9015 · reply to Tiki post #8998

sweet. uicai u'acai .i la'oi eSpeak cu mutce se nelci be mi

http://drop.io/pafcribe_jbopre/asset/testing-espeak-wav

On Mon, Oct 19, 2009 at 11:59 AM, Jonathan Duddington <[email protected]>wrote:

> On 19 Oct, Remo Dentato <[email protected]> wrote: > > > Unfortunately I'll stop exploring the Ivona voices, They told me that > > to distribure audio files, even for non-commercial uses like producing > > lojban examples, I need to buy a commercial licenses. > > "eSpeak" is an open-source TTS with a lojban voice which you can > experiment with: > > http://espeak.sourceforge.net > > The name of the lojban voice is "jbo". > > The current development version has a few improvements. It is at: > http://espeak.sf.net/test/latest.html > > If you have suggestions for corrections, please tell me. > > eSpeak uses formant synthesis and therefore the quality is not as good. > However, eSpeak can also be used as a front-end for "mbrola" diphone > voices, which sound more human. Perhaps you find one which has the > necessary set of phonemes for lojban. Information on eSpeak + mbrola > is at: > http://espeak.sourceforge.net/mbrola.html > > > > To unsubscribe from this list, send mail to [email protected] > with the subject unsubscribe, or go to http://www.lojban.org/lsg2/, or if > you're really stuck, send mail to [email protected] for help. >

>

Using TTS to create lojbanic spoken text

remod · 2009-12-05 12:56 UTC · Tiki post #9016 · reply to Tiki post #8998

I've installed espeak as well but the problem is in the quality of

sounds. To give an idea of the difference I've made a comparison file between espeak, ivona, acapela and oddcast.

  http://drop.io/uhjdnj3/asset/rutni-mp3

I'll probably continue playing with TTS. It would be great if jbovlaste had an example pronunciation for each entry!


To unsubscribe from this list, send mail to [email protected] with the subject unsubscribe, or go to http://www.lojban.org/lsg2/, or if

you're really stuck, send mail to [email protected] for help.

Using TTS to create lojbanic spoken text

lukebergen · 2009-12-05 12:56 UTC · Tiki post #9017 · reply to Tiki post #8998

yeah, some of those definitely sounded better than others. This sounds like

an interesting project. If we found a good TTL program/voice it doesn't seem like it would be all that hard to write a script to go through and create a wav file for every word on jbovlaste.

That'd be cool.

On Mon, Oct 19, 2009 at 2:33 PM, Remo Dentato <[email protected]> wrote:

> I've installed espeak as well but the problem is in the quality of > sounds. To give an idea of the difference I've made a comparison file > between espeak, ivona, acapela and oddcast. > > http://drop.io/uhjdnj3/asset/rutni-mp3 > > I'll probably continue playing with TTS. It would be great if > jbovlaste had an example pronunciation for each entry! > > > To unsubscribe from this list, send mail to [email protected] > with the subject unsubscribe, or go to http://www.lojban.org/lsg2/, or if > you're really stuck, send mail to [email protected] for help. >

>

Using TTS to create lojbanic spoken text

lagejyspa · 2009-12-05 12:56 UTC · Tiki post #9018 · reply to Tiki post #8998

On Mon, Oct 19, 2009 at 12:43 PM, Luke Bergen <[email protected]> wrote:

> sweet. uicai u'acai .i la'oi eSpeak cu mutce se nelci be mi > > http://drop.io/pafcribe_jbopre/asset/testing-espeak-wav >

 Sounds like one of those robots in the 1970s science fiction movies,

just before they say "doi jenmi .i ko daspo ro remna"

  ---gejyspa


To unsubscribe from this list, send mail to [email protected] with the subject unsubscribe, or go to http://www.lojban.org/lsg2/, or if

you're really stuck, send mail to [email protected] for help.

Using TTS to create lojbanic spoken text

lukebergen · 2009-12-05 12:57 UTC · Tiki post #9019 · reply to Tiki post #8998

apparently there are a "variants" on the voices. maybe I'll have to play

with some of them to try to get something more natural sounding.

On Tue, Oct 20, 2009 at 12:37 PM, Michael Turniansky <[email protected]>wrote:

> On Mon, Oct 19, 2009 at 12:43 PM, Luke Bergen <[email protected]> > wrote: > > sweet. uicai u'acai .i la'oi eSpeak cu mutce se nelci be mi > > > > http://drop.io/pafcribe_jbopre/asset/testing-espeak-wav > > > > Sounds like one of those robots in the 1970s science fiction movies, > just before they say "doi jenmi .i ko daspo ro remna" > > ---gejyspa > > > To unsubscribe from this list, send mail to [email protected] > with the subject unsubscribe, or go to http://www.lojban.org/lsg2/, or if > you're really stuck, send mail to [email protected] for help. >

>

Using TTS to create lojbanic spoken text

Jonathan Duddington <[email protected]> · 2009-12-05 12:57 UTC · Tiki post #9020 · reply to Tiki post #8998

On 20 Oct, Luke Bergen <[email protected]> wrote:

> apparently there are a "variants" on the voices. maybe I'll have to > play with some of them to try to get something more natural sounding.

Yes, the female variant is not a good choice. eSpeak makes a "female" voice from the male voice by just increasing the pitch and adjusting the speech formants.

If you are using the development version of eSpeak from: http://espeak.sf.net/test/latest.html

try the variant "m7".

espeak -v jbo+m7


To unsubscribe from this list, send mail to [email protected] with the subject unsubscribe, or go to http://www.lojban.org/lsg2/, or if

you're really stuck, send mail to [email protected] for help.